4an male x 3/8NPT Male Straight

Details 

If you are planning on adding a fuel return line kit, Nitrous oxide then this fitting will suit your needs. This fitting will screw into the ends of the fuel rail and will then give you a -4an end to thread the nitrous fuel line or run a return line from it.

Aluminum Billet LFSracing.com Fuel Rails

Details 

These fuel rails are made of the state of the art CNC machine. This to ensure precise measurements are retained. The fuel rail come with both ends tapped out to 3/8 NPT threads and a center port that's tapped to 1/8 NPT. These rails are great for TURBO CARS due to the ability of a return line off the rail. They are also great for Nitrous users or attaching a fuel pressure gauge to it. Comes with matching brackets and Stainless Steel Hardware. NEW INFO WE NOW HAVE RC INJECTOR BRACKETS IN STOCK! IF you have this rail and had issues installing it with RC injectors we now make a new bracket to work with the RC injectors You have the option to buy this bracket seperately as well or with the fuel rail. If you plan on upgrading in the future you can buy both brackets as a option instead of one or the other! Any q's please ask! Special note 3/8NPT is .675 this is not 3/8 standard thread which is much smaller. These rails will fit both -6an which is much smaller then the hole size on the rail with a 3/8npt to -6an 90 degree fitting OR if needing -8an which is .500 size you can use a 3/8npt to -8an 90 degree. The larger fitting might have to be used on the other side of the fuel rail to fit properly on SRT-4 motors due to the waterneck being in the way. But -8an is still smaller then the size on the rail so no restriction will be made by going to a -8an but most users won't need it anyways.

Aluminum LFS Racing RC INJECTOR fuel rail brackets

Details 

Finally we have finished making the modified brackets for the RC Injectors. There has been a problem with the RC injectors on the aftermarket fuel rails due to the fact that the injectors are fatter then the stock ones causing the injector to hit the manifold and the bolt holes not lining up. These brackets will bolt right up to the LFS racing fuel rail with the RC injectors and work perfectly. The bend is different then the stock brackets as well as the location of the hole moved to make the RC injectors work perfectly. I will be selling them seperately and with the rails when purchased new if you add that option. You will have the option to add the new brackets with the rail. due to the fact these were not anodized with the rails at the same time the color might have variations in it compared to what you have. With the bolts and washers when it's bolted down you hardly will see the bracket anyways but I wanted to let people know in advance about the color variations. These brackets are made in red, blue, black, silver, and polished finishes.

Billet LFSracing.com Fuel Rail Fitting SOLD OUT

Details 

**Package includes 1 fitting** - This fitting works with all LFS fuel rail systems. To retain your stock fuel line, you will also need a 3/8 male to 3/8 female 90 degree elbow. These can be purchased at any hardware store or at any fitting supply company.

Boomba Camgears 2.4L engine

Details 

NEW SRT-4 2.4L Cam gears. Made from billet and hardcoat anodized for superior protection. They only come in the black and red combo as shown no other colors available. They are 5 bolt pattern to hold the cam gears in place. These will work on any 2.4L motor including those doing 2.4L swaps into a first gen neon. If you have any q's regarding these cam gears please ask. These will NOT work on a 2.0 Engine so if you have a 2.0 engine do not buy this product! The gears were made solid to increase strength of the cam gears unlike many others that lightened them up drilling holes thus the gears started to crack on many people.

DODGE NEON SRT 4 Blow-Off Valve

Details 

Blow off valve for Dodge SRT-4 is a direct replacement of a factory unit. It’s a full and complete atmospheric BOV with 3 springs unlike some other cheap conversion plates. Three springs allow you to set boost pressure at 13 Psi, 16 Psi or 19 Psi. Valve is characterized by a quick response time, which prevents all surges in the intake manifold.

DODGE NEON SRT 4 Boomba Catch Can

Details 

Boomba Catch Can prevents build up of oil residue in the intake system and the engine. A built in window easily displays the level of contents. It is available in natural aluminum finish or with black, blue or red anodized finish.

DODGE NEON SRT 4 Boomba Short Throw Shifter

Details 

DISCONTINUED NO MORE SHIFTERS ARE AVAILABLE FROM THE MANUFACTURE AND I AM SOLD OUT OF THEM SORRY! Due to our unique design we were able to accomplish 65% throw reduction during gear shifts. Even thou we reduce forward and back motion by 65%, side to side motion is only reduced by 20%. This special feature prevents user from double shifting (engaging two gears at the time) which is common with competitors shifters. This shifter gives unforgettable feeling of control over your car. Your driving experience will never be the same. Shifter comes with our CNC machined knob. All components are CNC machined of billet aluminum and premium, high quality tool steel. Shifters are available in natural aluminum, red, blue and black anodized finishes. All parts are manufactured to our legendary high quality standards and backed up by our warranty.