2nd Gen LFSracing.com Throttle Body

Details 

These second generation TB's come anodized in 4 colors for looks and protection of the TB from the elements. LFSRACING TB's will work on 2000-20005 Neons with an Automatic or Manual Tranny. Please Specify when ordering what transmission you have. Note: If you are ordering a TB for a 2000 Neon, you will need to also order the additional IAC adapter to use the stock IAC sensor due to it being different on 2001-2005 neons. You will be using your original throttle cable bracket off of your stock TB. There is small modification that will be needed to make it work properly. PRICES AND PICTURES Please check the how to section for information regarding this modification. The anodized TB's come in your choice of colors; Red, blue, black, silver, or purple. Cleaning the TB's are simple just wax the TB just like you wax a car and it will shine and protect it.

4an male x 3/8NPT Male Straight

Details 

If you are planning on adding a fuel return line kit, Nitrous oxide then this fitting will suit your needs. This fitting will screw into the ends of the fuel rail and will then give you a -4an end to thread the nitrous fuel line or run a return line from it.

Alternator Overdrive Pulley ODP LFSRACING FREE US ONLY SHIPING!

Details 

LFS Racing finally got the time to make the BILLET ALUMINUM Altenator Over Drive Pulley (ODP). The pulley is made from 6061 Billet aluminum and machined on a CNC lathe for accuracy. We then do a Type III Millennium Hardcoat Anodizing on the pulley which is Extremely hard, dense and wear resistant aluminum oxide. The coating is Harder than tool steels, and the coating has the Corrosion resistance of STAINLESS STEEL! Thus this will make this pulley last many years without getting oxidized. Since the pulley is 20 percent smaller then the stock pulley this will make it spin faster, thus helping when your have a draw on the electrical system. This is great for people with large systems in their car as well as anything causing a large eletrical draw. This item will also help with dimming headlight problem. This pulley also weights a mear 1.9 ounces compared to the stock pulley weighing in at 7.7 ounces on the post office scales! FREE SHIPPING IS FOR US ONLY CANADA it will only be 2.50 extra to ship to you. If you are anywhere else please contact me for shipping information at sales@lfsracing.com

Billet LFSracing.com Fuel Rail Fitting SOLD OUT

Details 

**Package includes 1 fitting** - This fitting works with all LFS fuel rail systems. To retain your stock fuel line, you will also need a 3/8 male to 3/8 female 90 degree elbow. These can be purchased at any hardware store or at any fitting supply company.

Billet LFSracing.com Fuel Rails

Details 

These fuel rails are made of the state of the art CNC machine. This to ensure precise measurements are retained. The fuel rail come with both ends tapped out to 3/8 NPT threads .675 and a center port that's tapped to 1/8 NPT. These rails are great for TURBO CARS due to the ability of a return line off the rail. They are also great for Nitrous users or attaching a fuel pressure gauge to it. Comes with matching brackets and Stainless Steel Hardware. Special note 3/8NPT is .675 this is not 3/8 standard thread which is much smaller. These rails will fit both -6an which is much smaller then the hole size on the rail with a 3/8npt to -6an 90 degree fitting OR if needing -8an which is .500 size you can use a 3/8npt to -8an 90 degree. The larger fitting might have to be used on the other side of the fuel rail to fit properly on SRT-4 motors due to the waterneck being in the way. But -8an is still smaller then the size on the rail so no restriction will be made by going to a -8an but most users won't need it anyways.

Boomba Camgears 2.4L engine

Details 

NEW SRT-4 2.4L Cam gears. Made from billet and hardcoat anodized for superior protection. They only come in the black and red combo as shown no other colors available. They are 5 bolt pattern to hold the cam gears in place. These will work on any 2.4L motor including those doing 2.4L swaps into a first gen neon. If you have any q's regarding these cam gears please ask. These will NOT work on a 2.0 Engine so if you have a 2.0 engine do not buy this product! The gears were made solid to increase strength of the cam gears unlike many others that lightened them up drilling holes thus the gears started to crack on many people.

DODGE NEON SRT 4 Engine Mount

Details 

SRT-4 engine mounts are machined of lightweight, aircraft quality aluminum with solid polyurethane bushings. The polyurethane hardness is carefully chosen so the engine mounts do not transfer any excessive vibrations to the body but give you very sold feeling during acceleration. Engine mounts are direct replacement of the factory units and use the same hardware. You’ll be surprised how smooth your car accelerates with Boomba Engine Mounts.

DODGE NEON SRT 4 Engine Mounts Bolts Set

Details 

The set containes 5 bolts (class 12.9 - the strongest available) with hardened steel washers and a set of Allen wrenches. They are heat treated and have extremely tensile strengh. This set is to be used with Boomba SRT4 Upper and Lower Engine Mounts only.